• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

need help on cb radio setup

Just finally got my 203 from Newegg.

Don’t even know what I’ll use it for...maybe a driver for a DX3200 :D
I was thinking about using two 203s on a pair of mirror mount antennas with the cophase harness. One amp per antenna. They would probably need some kind of input match. Haha!
 
I run a 980 barefoot, 30 miles is never a problem, base to base. My antenna I built from wire is below
Mg Diamond jpeg.jpg
4 to 1 balun.jpg
 
http://www.vk5dj.com/yagi.html

Yagi calculator I have used in the past.... Maybe I'll just make another one for the cb frequencies I want to operate on.

Yagi's are extremely directional.
Do want to beam to a specific received ?
Or send and receive in 360 deg?
With the old Antron. A 3 piece 18ft fiberglass antenna,bout $80 bucks.
I could talk talk 30 miles.
It was 50 ft up on the house peak.
My favorite radio is the Galaxy DX 959.
With soldering skills you can turn any CB into a great radio.
Better quality voltage regulator.
Better quality filter diodes and a few other tweeks.
My real question is.
Will you be communicating with other vehicles, handhelds, properties?
You can buy 5-30 watt FRS radio base stations.
And 5 watt hand helds.
And set up a pretty good system.
If privacy is key.
You'll have to go digital.
There are business bands that don't require a lisence.
The radios are more expensive.
But digital security can be priceless.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Wildcat27:
    Hello I have a old school 2950 receives great on all modes and transmits great on AM but no transmit on SSB. Does anyone have any idea?
  • @ ButtFuzz:
    Good evening from Sunny Salem! What’s shaking?
  • dxBot:
    63Sprint has left the room.