Search results

I would like to know what a fair price,not high and not low,but fair.For a virgin cobra 148gtl dx "1982" in excelent cond. Thank you.

Although Frank was one of the techs at FG Best,I hope you arent confusing him with Justin.

Worked out great.Thanx Mack!!!!

I have a m4v that has a circuit board attatched to the variable on the inside.With the top off,variable to you,looking inside,the board goes off to the left.one resistor sits horizontally along the top,to the left of that one there is 2 that sit side by side vertically.I need the value of the...

AMPS R US-$750+shipping RF PARTS Fan KIT-$109+S&H Remote-$50+S&H

Wilson 2000

A puck is a style of mount that actually goes through the roof and is very very sturdy compared to any other style through the roof mounting set up.It's purpose is to be able to attatch any of the bigger alluminum antenna's without moving around because of the leverage created from the wind...

My bad there QRN,After a second look at that and realizing that it means 2x4-1000,Im feeling pretty dumb to say the least.I was wrong and please disregard my post.As far as the Adam bashing,I have had 2 of his boxes and still going strong.!!!!No more needs to be said!!Not into the B.S.

DELETE this post as I was WRONG!!!!!!

Im asking this question cause I dont want to make a mistake on my new 07 Explorer!!! Dead center of the roof ? Or dead center of whole vehicle?In about a month or 2,Ill drill my holes for the puck mount to put up my 4 coil Stargun,Looking for Ideas.Until then I'll have to slum it with the 5000...

Ive been watching them go on e bay for 200 to 300 depending on condition.

I-10K Just built it today and tested it on the ground and had a 1.2 without messing around with it anymore.Ran into an issue with my tower.I had to take what I believe would be called the thrust bearing sleeve,what the mast sets in.There was allready a piece in there that I cant get out that...

Wavin a hand there 606. Hope you get your issues squared away.Ill be listening for ya.Tried calling ya but no answer.

http://www.cbtricks.com/forum/index.php?topic=1673.0 Here is the post your talking about.Its on cb tricks.Hope this solves your problem!!I have the same prob with my 99,but dont ever use 13 so its not a problem 4 me.It was just nice knowing I wasnt the only one!

Just got my 60' tower up today for the trial run to make sure all was well with the measurements.Still have to finish the fabrication of the mount thats going to attatch to the house.Still have a couple of weeks probably till I get my antenna anyways.Ran it all the way up today and the top...

Allready sent off my money for the I-10k.Thanx for the help guys.

Im up in the air and need some help from people with Knowledge of these 2 antennas.Im going to bite the bullet and get one or the other.Both comparable antennas in price.Have heard nothing but good things about the 10k and vertually nothing on the jo gunn.Any help would be appreciated.Im an 11...

They definately slowed down for a while,but they are definately increasing.No doubt about it.Annoying to say the least!!

# 1- I run mine with squelch all the way down and the rf backed off just before the noise,and when I want better ears,I go into the noise a little or a lot depending on what I want at that moment.I like to hear just a little noise to know Im not missing anything.My squelch is always off...

Well, Ive had my chance to spend some time playing around.Didnt want to jump the gun and post something before I had a true honest opinion. Im using it in the house hooked up to a astron 50amp power supply with a dosy 4001 test center for my readings.Topps out at somewhere around 450 and no...