Search results

Possibly a stuck relay or a bad transistor closest to the relay. Sent from my iPhone using Tapatalk. 45, North Florida

Problem solved...I was about to change the if board when I saw one of the connectors slid almost al the way of a connection. I plugged it back in and bang. There was the problem. Glad it was this simple. Thanks forth suggestions guys...I owe you all one for the help. Sent from my iPhone using...

Yea the if. Is centered. I'm leaning towards the ssb filter now but I didn't know they could just go bad. The problem is on all bands...10 meter all the way down to the bottom. Sent from my iPhone using Tapatalk. 45, North Florida

I turned my 820 on tonight and to my surprise the receive sounds garbled up and like your not really on the right frequency. Any ideas on this? This happens on all bands. Sent from my iPhone using Tapatalk. 45, North Florida

I run an 820 which is very close to the 520 aside from the freq counter my 820 has. I run a 300 ohm shure sm58 mic to a line transformer to convert the signal back up to high impedance which is what all the kenwood hybrids prefer, then to a 4 pin right into the radio. I get good reports with my...

Test test Sent from my iPhone using Tapatalk. 45, North Florida

Thinking about trying one of these to run a mobile 2 meter amplifier and just have good power for my bench but was wanting to get some opinions first. Do they put out clean power for instance? Sent from my iPhone using Tapatalk. 45, North Florida

Please pm with any replys. Sent from my iPhone using Tapatalk. 45, North Florida

Need it to be new or in good condition. Sent from my iPhone using Tapatalk. 45, North Florida

I think around 25-35 dollars on most auction sites. Sent from my iPhone using Tapatalk. 45, North Florida

My goodness....... Sent from my iPhone using Tapatalk. 45, North Florida

I think that would be a good match. Enough drive out of the stryker to get down when conditions are rough. Sent from my iPhone using Tapatalk. 45, North Florida

So they worked well together Charlie Brown? No voltage drops or anything? Sent from my iPhone using Tapatalk. 45, North Florida

What would be the safest power to dive this amp in ssb? Maybe 70-80 watts? Sent from my iPhone using Tapatalk. 45, North Florida

No I hope to never see 1000 watts out of it. I am just glad it sounds good over the air. Sent from my iPhone using Tapatalk. 45, North Florida

Will this work? I have two pyramid 50 amp supply's. just curious if they will work in parallel. Sent from my iPhone using Tapatalk. 45, North Florida

This amp only puts out about 400 with 30 watts swing in in ssb. Is this about right? I know the rated power is with about 100 watts input. Just wondering? Sent from my iPhone using Tapatalk. 45, North Florida

Will this setup work for a battery charger or will the two not work together? Sent from my iPhone using Tapatalk. 45, North Florida

I'm glad to hear that you got it going again. The caps are a simple and cheap fix to restore the REAL tube sound that should be coming from all these old tubers. '73! Sent from my iPhone using Tapatalk. 45, North Florida

They should be 100uf 450 volt caps if I'm not mistaking. Don't forget to make sure you short them out before you touch anything. The high voltage inside these amps CAN KILL you. Keep us posted. Sent from my iPhone using Tapatalk. 45, North Florida