i wanted a high power 2 meter radio. what i wanted was dropped from production so i bought this pos. worked sorta ok for a few minutes n temperature spiked ,transmission went down. im saying about 3 minutes on 80 watts on simplex,thats 2 way conservation. let it cool down n same crap again. checked voltage. it drops a 40 power supply from 14 volts to 12.5 on 30 watts n from 14 volts on 80 watts to 11.9 volts. i spent $25 for shipping to let it set at repair center 2 damm months just to get a new mic n a severe lecture about using 80 watts. i asked wtf they put 80 watt capability in it n i cant use it? subject was changed immedietly to my power supply is bad. i then said i run a 160 watt mirage n it only drops my power supply from 14 volts to 13.6. anyhow i see ive lost the battle. when the pos arrived it got hot on 30 watts talking simplex like 150 degrees in 10 minutes. its new but hey they aint gonna fix it so i opened it up n seen shitty workmanship. can anybody else spot the trouble? im waiting on a needed item to arrive n i will fix it myself. 1 ground lug soldered too,not a killer but sloppy workmanship. least i only got 1 lug to unsolder on ground side you can see slip of paper between board n ground lug