• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

New profile posts

I’m not a professional anything just a lover of the whole world of radio communication and I have a lot of respect for people who have the knowledge to do this I learn every day at least I try to, been disabled and divorced since 2009 and have a lot of time on my hands and not much money so I’m always building, trying, experimenting and I appreciate any help and I will be donating to this site

Attachments

  • image.jpg
    image.jpg
    1.8 MB · Views: 35
Is your old web content still available anywhere? Every link I have tried on this thread fails.....
Thanks!!!!!! Bob
ButtFuzz
ButtFuzz
Have a look in the Tech Section, I believe the updated links are there…
Changed my profile picture to a snapshot of me and Tabitha D. Cat, operator ID K1TTY.
That was 11 years ago. She's still my best buddy.
9/15/25 Many Improvements last few months on 2x 4cx300a amp. PTP wiring cleaned-up; RF pass-thru perfect, Xmit below 2. Resistive input dropped to 700 Ohms; Moddrd LPF relay board for switched Input works well all 4 bands 10,11,20,40. Still on DL, antennas soon. Blower runs quit, Slow Receive, Fast Xmit. Triac based dimmer added 70uH 2A toroidal inductor big help motor smoothness. Amp becoming useable.
  • Like
Reactions: AudioShockwav
N
Naysayer
Had to add 7815 regulator for input board relays. It’s the small Heatsink in corner of board Working through everything
Im a new member, hoping to find some info (perhaps a manual) for a Heathkit-hw-202 tranciever, looked everywhere with no luck. Not sure Im in the right place but thanks in advance.
73chip
Big Rig Radio
Phoenix AZ
623-889-5500
602-515-6389

Attachments

  • sign.jpg
    sign.jpg
    16.6 KB · Views: 613
  • Logo (1).jpg
    Logo (1).jpg
    208 KB · Views: 613
  • IMG_20240303_203950031.jpg
    IMG_20240303_203950031.jpg
    1.7 MB · Views: 316
Hello Nomadradio,
Maybe you can help me I'm looking for Service Manual for my Belcom LS102 to carry out an alignment step by step on SSB the TRX is of frequency approximately 300Hz
I can't find anything useful on ModsDk and Google

73 Werner DK3WS

Attachments

  • belcom-ls-102.jpg
    belcom-ls-102.jpg
    63.4 KB · Views: 364
nomadradio
nomadradio
Never have seen one in the flesh. The Rick Jackson diagrams on cbtricks.org don't include guidance on alignment. Gargle isn't much help, either.
CB-Whisky
CB-Whisky
OK thanks for Info
73 Werner DK3WS