• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Which CB Shops are still accepting mail-in repairs?

Ok, what's wrong with Smokin Joe's? He seems to more legit then some other guys out there. Tap tap tap. Pay attention, anyone?

My shop of choice is Clay's Cb. He does great work and is close by.
Now as far as when my Magnum s45 needs attention it goes out to Chris at the Radio Shop in Ontario, Ca. Very good experience with him and reasonably priced repairs.

Have used only Clays since ‘97.
 
  • Like
Reactions: undertaker
What exactly does that mean they were all fixed and now only one works?
Galaxy 99V has gone into a scan mode and there is not a scan mode on this model. Can't get it to stop. Ranger 2970N2 had a cold solder and now the slightest bump sends the radio to 28 MHz and with a slap on its side, the radio will go back to 24 MHz(back to 11 meters with a push of a button). 2510 tune done by Doc out of Buffalo was taken out and now the receive is muffled and all the radio's do not have any modulation.
 
Galaxy 99V has gone into a scan mode and there is not a scan mode on this model. Can't get it to stop. Ranger 2970N2 had a cold solder and now the slightest bump sends the radio to 28 MHz and with a slap on its side, the radio will go back to 24 MHz(back to 11 meters with a push of a button). 2510 tune done by Doc out of Buffalo was taken out and now the receive is muffled and all the radio's do not have any modulation.
OldTech03 did a great job on my 99v. I will be sending him another radio soon. Check it out:

https://www.worldwidedx.com/threads/galaxy-dx99v-back-in-service.245815/#post-683429
 
  • Like
Reactions: S&W357 and Unit 194
Whatever happened to MikesRadioRepair? He hasn't posted a new YouTube video in over 6 months.
https://www.youtube.com/user/trclubricants/feed

I have to believe Mike just got overloaded with work from his YouTube channel. I just sent two older Bearcat scanners to him for restoration, so we’ll see if I hear from him when they’re done (I expect to hear from him).

I figure he just stopped posting videos because it only created more work for him. I have had the pleasure of talking to him on the phone in the past (he called me with questions regarding a previous repair), and he is just as he seems on his videos. He has always done a great job on my radios, and I hope to send a few more in the future.
 
I have to believe Mike just got overloaded with work from his YouTube channel. I just sent two older Bearcat scanners to him for restoration, so we’ll see if I hear from him when they’re done (I expect to hear from him).

I figure he just stopped posting videos because it only created more work for him. I have had the pleasure of talking to him on the phone in the past (he called me with questions regarding a previous repair), and he is just as he seems on his videos. He has always done a great job on my radios, and I hope to send a few more in the future.
He has also done a great job on my radios but he has been very quiet for the past 6 months on his YouTube channel. I thought that he might be taking a well deserved vacation. :)
 
Galaxy 99V has gone into a scan mode and there is not a scan mode on this model. Can't get it to stop. Ranger 2970N2 had a cold solder and now the slightest bump sends the radio to 28 MHz and with a slap on its side, the radio will go back to 24 MHz(back to 11 meters with a push of a button). 2510 tune done by Doc out of Buffalo was taken out and now the receive is muffled and all the radio's do not have any modulation.


Maybe Doc's tune is laying around there on his bench, send the radio back and have him put it back in.
 
  • Like
Reactions: Shadetree Mechanic

dxChat
Help Users
  • No one is chatting at the moment.