Search results

Does the Wouxun KG-UV950P crossband repeat function work with 10m to 2m crossbanding?? I read the unit will do VHF/UHF crossbanding, but wondered has anyone tried to do 10m and 2m crossband on it??

I setup a GM300 for my truck that is wideband according to the model number.M33GMC29C2AA. It accepted all local repeater frequencies in RSS and seems to be working as I can trip them and they sound clear coming in with tones and such. Some of them are like 146.835- and 147.285+. My question...

Okay, so you all win.. I get it duplexers.. now which brand do you prefer for this.. The 'repeater' is to be 2 of the GM300 ( have one already) which will TX at either 10w or 25w (still undecided, feel free to chime in on that too..), running a 600 khz split, and using an ID'omatic IV for CW ID...

I would like to use 1/2 of mobile VHF duplexer as a 'filter' on the RX radio as part of a repeater setup. The radio is RX only and will not be set to transmit at all. I noticed most BP filters only do low db isolation where duplexers do like 50-60db. Can the unused freq side be just left...

Has anyone used 2 to get there desired split? And if so where how would you hook them together and what do you put on the open connectors? If I can use 2 of the $100 China ones and good connection coax I was thinking this may work to get a 600khz split (or 1mhz if easier.) I am still open to 2...

According to the commscope isolation calc at 146mhz using a 1/2 wave set of antennas (that's there baseline calc) at 65' on horizontal plane I should be at approx 42db isolation. What could I see for isolation db if I run just plane 1/4 wave (aka unity gain) antennas? My proposed setup is a...

I have 2 Kenwood TM-V71a radios I'd like to set up a small 2m repeater with.. Receive 2m on unit #1 and then using the 70cm side to transmit (at 5w low) the signal across the house to the 2nd unit in 70cm and then out 2m.. The unit(s) features CW ID'er and remote turn off via DTMF control if...

I got a DX-929 tuned/peaked up from CB world (wearecb) before they shipped it. The internal meter is reading higher than it should for deadkey. I get a 6w on lowest setting with knob and over 18w on 3/4 setting. and the 18+w deadkey with the power knob turned 3/4 way up.. After...

So I was on the fence for a new CB. My last was a Cobra 25 back in 2002.. which got tossed in trunk of car and got wet/rusty.. I was tossing around AM or SSB/AM radios because a co-worked wanted a CB again.. My co-worker wanted a Galaxy DX-949 with SSB.. but me on a budget opted for the...

My uncle left me an old Sharp CB-800 (23 channel) and on the web it says L302/L303 for power and R112 for modulation.. (others say R110 and T304).. I opened it up and.. well I don't know where to find these 'pots'. Can anyone on here whom may have one (or something with the same board) open...