Search results

Does anyone know how to drop the wattage on a 40 channel model "T" without de-tuning it? It keys about 4 watts now, but i would like it to be 2 watts. There is a 10 watt resistor in a browning mark III power supply that can be changed to a higher resistance and drop the wattage. Just wondering...

http://www.bellscb.com/products/tenmeter/ranger/Images/Ranger_RCI-2998_2.jpg

I finally got the NS 9500 converted, thanks to you. Now I have a talkback problem. I would like to disable it since I don't like it anyway. Creates a horrible squeel. There is nothing I can find on the net that has a schematic for the 9500. I have been trying other radios that have a 3600 14b...

Does anyone know how to actually do the channel conversion for the northstar 9500? I have read everything I can and it says to cut the small loop on the channel board and then re-connect the yellow wire to get 11 meters. I can't see a small loop and every yellow wire is intact and not...

Does anyone know how to actually do the channel conversion for the northstar 9500? I have read everything I can and it says ro cut the small loop on the channel board and then re-connect the yellow wire to get 11 meters. I can't see a small loop and every yellow wire is intact and not...

All of a sudden my 2995 has lost most of it's receive. You have to turn it 3/4 way up on the volume to get it loud enough to hear anything. Does anyone have any idea what happened? I am not to good on these smt boards. Thanks

Has anyone heard anything about the new connex base radio? Just wondering how it performed, and is it any different than the 2517 galaxy. I haven't seen any schematics on it. Thanks

I have an old lafayette range boost microphone. Is it the same as a turner +3? It looks like one and I was wondering if it had the processor in it. Thanks for any help

I am wanting to build a power supply for an amplifier and was wondering if a transformer out of a large battery charger would work. Transformers are so high when you can find them that it is not practical to buy them. I am wanting to build the amp and power supply in one box. You can buy them...

Has anyone seen the new 2517 with the mosfet finals? If so, how do they perform, and where can you find one? Thanks

Does anyone where I can find the instructions to do the mosfett mod on the EPT6900 board? All I have been able to find is for the EPT3600. This is for a Galaxy DX 2517. Any help would be appreciated. Thanks

Does anyone where I can find the instructions to do the mosfett mod on the EPT6900 board? All I have been able to find is for the EPT3600. This is for a Galaxy DX 2517. Any help would be appreciated. Thanks

Will a 25-60 Mhz slug work for CB? I notice they are cheaper than the 2-30Mhz ones. I know they are in the CB range but thought something was up because of the price. Thanks :lol:

Can you put a peak reading board in a 4431 Bird? Also will it perform in the CB band> Thanks :lol:

I recently acquired a 2517 galaxy. It talks fine but sounds real "basey". I am using a D-104 mike. I was just wondering if anyone else has had the same problem. ThankS

I have a 25 LTD classic that I am trying to tune. The tuning proceedure say tune L8, L9 and L 10. I don't see any of those numbers in the radio. Any help would be appreciated. Thanks

Does anyone have a schematic for a 811 amp? I found one a website but do not understand it. It has the input going to the # 1 pin. (filament connection)? I have built sweep tube amps before but this is something different. A simple schematic is what I need because of "brain-dead" syndrome...

I have a MDX 200 that I don't think has been changed over. I need to know what to do to change to 11 meters. I have re-tuned the tank coils and got it to put out but it has a bad hum in the transmit. I have changed out the electrolytics and that didn't help. I am wondering if the oscillator...

Would anyone know the number of turns and the diameter of the driver and final tuning coils on the skipper 300? I bought one and it is set for another band. I tried winding some using the pot luck method and helped it but I would like to know the right size. Thanks

Will a golden Eagle MarkII Transmitter work with a Mark III receiver? Thanks Ray